PRODUCT
200W Electric Hot Knife Polystyrene Foam Groove Cutter Styrofoam Cutting Tool Kit
[ So Clean And Smooth,NO MESS ]YOBER styrofoam cutting tool cuts styrofoam,polystyrene,EPE,XPS .The cutting edge is so smooth and clean,you could cut the foam board or foam block into any shapes.And you could also art and sculpture foam/sponge through DIY.
[ Adjustable Temperature ] Electric hot knife could adjust temperature on the handle.Temperature is 0-550℃.Adjust the wheels until the light is not shining,it is best to cut foam.It cuts the foam and sponge like a butter.
[ INDUSTRIAL GRADE ] It is suitable for commercial and industrial use,we stand behind the quality of our products.We support one year limited warranty.
-- ADVANTAGES: YOBER Electric styrofoam cutter kit is used at 5-10 minutes intervals and allow to cool for about 5-10second in between.It could fit kinds of blades to cut most types of synthetic fabrics and nylon ropes,PP ropes,sailing cloth,canvas,webbing belts,net,tube,plastics and many other low-density materials.The cutting edge is so clean and no debris.Like a hot knife through butter reaching better temperature to cut your materials as 5-10seconds.
-- How to use A HOT KNIFE? Insert blade into the knife holder.You must tighten the screws.Otherwise bad connecting would cause the knife being broken.Plug in the hot knife and press the switch.The light is shining. So please adjust wheels until the light is not shining. It is best position to cut your materials. If you feel the temperature is not good,you could still adjust the wheel to max temperature. Always clean your blade by brush!
NOTES: 1) In order to make sure the connection is very good, please kindly try tightening or re-inserting the blade and tightening the screws.
2) This foam cutter can also came in handy for DIY projects. Specifically, you could us hot knife for making props for costumes and cosplay.
Functions:
-- 300mm(12" ) blade could fold into kinds of shapes ,the two sides could fold into 90° to insert the knife holder to sculpture foam/sponge. It is like a art foam cutting hobby tool
-- Small Groove Kit is used for grooving with 170mm blade or 300mm blade,the total groove perimeter is 150-200mm
-- Big Groove Kit is used for grooving with 300mm blade,the total groove perimeter is 150-200mm
-- Assist Guider is assited for straight cutting foam/sponge
--FAQ
1) Question 1: Can it cut foam board and KT board?
Answer : Yes,hot knife could cut all types of foams.
2) Question 2: Does this hot knife work on 110V US Plug?
Answer : Yes,the hot knife has 110V and 220V voltage.The plug has US/UK/SAA/EU plu.When you purchase your order,kindly confirm it.
3) Question 3: Can it fit 300mm blade directly?
Answer: It is ok,then you need to bend the two side into 90° to insert the knife holder,You could use it for art foam sculpture.
4) Question 4: Can it cut foam grooving?
Answer: Yes, with small groove kit or big groove kit,300mm blade can be folded into any shapes to groove and carve.
